ANYCUBIC CHIRON FDM 3D PRINTER CURA PROFILES

0,00 

Here you will find the Anycubic Chiron profiles and settings for Cura software. These settings are tested for ABS, TPU and PLA. These settings have manufacturer recommended settings for speed, bed heat, nozzle heat etc. Follow the below procedure, and add the printer and the profiles. See how it prints, please share your feedback here.

SKU: ELE-DN0002 Category: Tag:

Description

Here you will find the Anycubic Chiron profiles and settings for Cura software. These settings are tested for ABS, TPU and PLA. These settings have manufacturer recommended settings for speed, bed heat, nozzle heat etc. Follow the below procedure, and add the printer and the profiles. See how it prints, please share your feedback here.

  1. Open Cura software
  2. Go to Menu > Preferences > Configure Cura
  3. Make sure your printer is added as shown on the video. If not, add your printer from printers tab, find anycubic and Anycubi Chiron printer.
    Then go to “Profiles” section as shon on the below photo, > import profiles:
  4. Select profiles and add them

  5. Select the right profiles from Profiles list. Slice your model and upload the file to SD card and start printing:

 

https://youtu.be/1DP4C46nk6w

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.